Starlink Install, Speed Test, and Review
นอกจากการดูบทความนี้แล้ว คุณยังสามารถดูข้อมูลที่เป็นประโยชน์อื่นๆ อีกมากมายที่เราให้ไว้ที่นี่: ดูเพิ่มเติม
Installing SpaceX’s Starlink with the volcano roof mount. Running speed tests and comparing Starlink to Telus Smart Hub. Rural internet solution!
𝐃𝐫𝐢𝐩 𝐋𝐨𝐨𝐩: \”a downward hanging loop in a line that runs to a building\”
A very important step that was missed and pointed out in the comments is using a drip loop. I should have ran the line below the wall penetration, then back up before entering the wall. This will allow any water that might travel down the line to drip to the ground and not direct it towards the wall. See 7:34 for an example of a drip loop.
𝗔𝗺𝗮𝘇𝗼𝗻 𝗔𝗳𝗳𝗶𝗹𝗶𝗮𝘁𝗲 𝗟𝗶𝗻𝗸𝘀
Cover Plate Retrofit
Cover Plate Box Required
1 ½” SS Exhaust Clamp
1 ½” SS Hose Clamp
0:26 Installation Plan
11:24 Speed Tests
12:01 Starlink vs Telus
Want to support my channel or give back? Help me improve on these DIY videos by making a financial contribution. All contributions no matter how small are greatly appreciated!
More DIY videos! https://www.prosdiy.com
Disclosure: Pros DIY is an Amazon Associate. We earn a small commission from qualifying purchases through our affiliate links at no additional cost to you.
Videos produced by Pros DIY (https://www.prosdiy.com) are provided for informational purposes only. Please check with all national, state, provincial, and local codes and regulations before attempting any work. Pros DIY does not assume any responsibility or liability for any damage or injury from the information provided in our videos. Please hire a licensed, certified, professional.
SPEED TEST AIS Fibre 1 Gbps (1000/200 Mbps)
2 separate Internet on 1 Fiber cable | NETVN
Hi, with only one fiber optic cable, you can create 2 separate internet lines
This is how you do it
Help me 500K subscribes https://goo.gl/LoatZE
Speed Test AIS 10 mbps part-1(1)
Salt Fiber 10GBit/s Speedtest: huge differences between test with browser or app for speedtest.net
Salt Fiber 10Gbit/s delivers approx. a maximum of 8 Gbit/s, due to the used XGSPON technology.
If you have the proper equipment (fitting Ethernet device and NVME SSD), you might be \”disappointed\” when testing per browser on www.speedtest.net, as you will get a maximum of 2 or 3 GBits at best. However, this is due to the browser application which looks limited / fails in that case of potential speeds up to 10Gbit/s. Instead, choose the speedtest.net application for Win and others, install and check again with that. It delivers accurate, and of course faster results. Best result with the nearest servers, the values decrease with increasing distance. Nevertheless, the differences between browser test and app test remain.
Check my other video speedtest on salt fiber with real file download: https://www.youtube.com/watch?v=WpbHNGjHZKI
นอกจากการดูหัวข้อนี้แล้ว คุณยังสามารถเข้าถึงบทวิจารณ์ดีๆ อื่นๆ อีกมากมายได้ที่นี่: ดูบทความเพิ่มเติมในหมวดหมู่Tech